Clutch Bellhousing

CLUTCH BELLHOUSING

DISASSEMBLY





1. Using suitable punch/drift, remove input shaft seal (Fig. 115) and discard.





2. Remove output shaft roller bearing (Fig. 116).





3. Using Tool 8868, drive out shift shaft needle bearing (Fig. 117) and discard.





4. Using Tools 8915 and 8913, remove differential bearing cup from clutch bellhousing (Fig. 118).





5. Using Tools 8915 and 8912, remove input shaft roller bearing from clutch bellhousing (Fig. 119).





6. Using Tools 8915 and 8913, remove output shaft bearing race from clutch bellhousing (Fig. 120).

ASSEMBLY





1. Install differential bearing select shim into clutch bellhousing pocket (Fig. 121).





2. Using Tool 8866 and Driver Handle C-4171, install differential bearing cup into clutch bellhousing until cup bottoms into bore (Fig. 122).





3. Position input shaft bearing to bore with letters outward (Fig. 123).





4. Using Tool 8921 and Driver Handle C-4171, install input shaft roller bearing until it bottoms in bore (Fig. 124).





5. Install output shaft bearing race to bore. Orient smaller inside diameter downward (toward case) (Fig. 125).





6. Using Tool 8871 and Driver Handle C-4171, install output shaft bearing race until it bottoms in bore (Fig. 126).





7. Using appropriate end of Tool 8868, install shift shaft ball bearing until tool bottoms on case (Fig. 127).





8. Using Tool 8864, install input shaft oil seal until tool bottoms on case (Fig. 128).