Detent Plug

DETENT PLUG

DESCRIPTION








The 288 Transaxle utilizes four (4) shift rod detent plugs (Fig. 129) (Fig. 130). The detent plug is a spring-loaded ball assembly that engages shift rod recesses, providing a positive shift feel while maintaining gear position.

REMOVAL





1. Remove transaxle assembly.
2. Using Tool 8870 attached to Tool C-3752, remove detent plug(s) from transaxle case (Fig. 131).

INSTALLATION

NOTE: Inspect detent plug for signs of wear or damage. If necessary, replace detent plugs with new upon installation.





1. Install detent plug into case (Fig. 132).





2. Using soft-tipped hammer, drive detent plug into case until it bottoms (Fig. 133)
3. Install transaxle assembly.