Ballast Module

BALLAST MODULE

REMOVAL




1. Remove the headlamp unit.




2. From the underside of the headlamp unit, remove the six retaining screws (1).




3. Pull the ballast module out of headlamp unit.
4. Disconnect the two electrical connectors (1 and 2).
- One of the connectors (1) will be a standard push tab to release connector.
- The second connector (2) has a lever that must be rotated away or down from the wire of the cable and connector.

5. Separate ballast module from headlamp unit.

INSTALLATION




1. Connect the two electrical connectors (1 and 2).
- One of the connectors (1) will be a standard push tab to release connector.
- The second connector (2) has a lever that must be locked when connected.

2. Position the ballast module in of headlamp unit.




3. From the underside of the headlamp unit, install the six retaining screws (1).




4. Install the headlamp unit.