Vehicle Theft Security System
B2206-CURRENT VIN MISSING/MISMATCHWHEN MONITORED
Anytime the ignition key is in the on position.
SET CONDITION
VIN stored in Intrusion Transceiver Module does not match the VIN stored in the Cluster.
POSSIBLE CAUSES
- Intrusion transceiver module swapped from different vehicle
Diagnostic Test
1. DETERMINING IF DTC IS CURRENT
With a scan tool, read and record DTC(s).
With the scan tool, clear DTC(s).
Turn the ignition off and remove the key from the ignition.
Lock and close all doors to allow the VTSS to go from pre-arm to armed status and wait one minute.
Disarm the VTSS.
Using the scan tool, read DTC(s).
Q: Does the DTC reset?
YES: Using the scan tool under Miscellaneous functions initialize the Intrusion Transceiver Module. Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test
NO: DTC is not active at this time. Test complete. Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test