B1A26

B1A26-MAXIMUM NUMBER OF KEYS PROGRAMMED

WHEN MONITORED
With the ignition on.

SET CONDITION
When the maximum number of keys (8) have been programmed into the Sentry Key Remote Entry Module (SKREEM).

POSSIBLE CAUSES
- Maximum amount of key programmed into SKREEM
- SKREEM

Diagnostic Test

1. REPROGRAM ALL IGNITION KEYS

NOTE: This procedure will clear all the key information from the SKREEM. It is important to obtain all of the customer's ignition keys so they may be reprogrammed into the module.

Turn the ignition on.
With the scan tool, clear all the key information in the SKREEM.
Program the all of the customer keys into the SKREEM (maximum eight).

Q: Did the "maximum Number of Keys Programmed" display again?

YES: Replace and program the SKREEM.

NOTE: If this vehicle is equipped with a Steering Column Lock Module it must be replaced along with the SKREEM. Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests

NO: Programming of the keys was successful. Test complete. Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests