B1BBD

B1BBD-OCM CURRENT CONFIGURATION TABLE UNPROGRAMMED

WHEN MONITORED
If the Configuration Table is not programmed at the supplier or when the checksum is invalid.

SET CONDITION
This DTC will set if the module was received unprogrammed from the supplier, the vehicle line was not identified correctly or if the flash procedure was not completed successfully

POSSIBLE CAUSES
- New occupant classification module
- Internal checksum failure

Diagnostic Test

1. MODULE CONFIGURATION

Q: Does the scan tool display B1BBD-OCM CURRENT CONFIGURATION TABLE UNPROGRAMMED?

YES: Perform the B1BA7-OCS VERIFICATION REQUIRED diagnostic procedure. B1BA7
NO: Replace the Occupant Classification Module.

WARNING: IF THE OCCUPANT RESTRAINT CONTROLLER (ORC) IS DROPPED AT ANY TIME, IT MUST BE REPLACED. FAILURE TO TAKE THE PROPER PRECAUTIONS CAN RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND PERSONAL INJURY OR DEATH.

With the scan tool, Perform the OCCUPANT CLASSIFICATION MODULE SYSTEM VERIFICATION TEST. Occupant Classification Module (OCM) System Verification Test