Clock: Service and Repair

CLOCK

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. Remove the Instrument Panel Center Bezel.




3. Remove the two retaining screws (1) holding the clock to the rear of the I/P Center Bezel.




4. To replace the clock illumination lamps (1), turn sockets counterclockwise to remove lamp and socket.

INSTALLATION




1. Place lamp and sockets (1) into opening and turn clockwise till detent is felt.




2. Place the clock into bezel opening and then install the two retaining screws (1).




3. Install the Instrument Panel Center Bezel.
4. Connect the battery negative cable.
5. Adjust clock to proper time.