Dome Lamp - PT27

DOME LAMP - PT27

REMOVAL




1. Open hood.
2. Disconnect and isolate the battery negative cable.
3. Using a trim stick (special tool #C-4755) or equivalent, gently pry off the dome lamp cover from the sport bar.
4. Disconnect the dome lamp from the connector.
5. Remove lamp from vehicle.

INSTALLATION




1. Remove lamp from vehicle.
2. Connect the dome lamp to the connector.
3. Position the dome lamp cover on the sport bar and firmly push on cover to snap into place. The lens must be orientated correctly for proper fit.
4. Connect the battery negative cable.
5. Open hood.