Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> 300 V6-2.7L VIN R >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> EGR Valve >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






2.7L




1. Clean mounting surface.





2. Install EGR valve.

3. Install the EGR valve mounting bolts (1).

4. Inspect rubber silicone seals on intake manifold end of EGR tube.

5. Install upper tube into the intake manifold, being careful that the silicone rubber seals are correctly installed and undamaged.

6. Install new gasket between the EGR valve and upper tube and install bolts (2).

7. Install the lower tube to exhaust manifold.

8. Install new gasket between the EGR valve and lower tube and install bolts (3).

9. Tighten the lower tube to EGR valve bolts (3) to 11 Nm (95 in. lbs.) torque.

10. Tighten the lower tube to exhaust manifold bolts to 31 Nm (275 in. lbs.) torque.

11. Tighten the upper tube to EGR valve bolts (2) to 11 Nm (95 in. lbs.) torque.

12. Tighten EGR valve to cylinder head bolts (1) to 31 Nm (275 in. lbs.) torque.





13. Connect the electrical connector to EGR valve and lock.

14. Relocate the purge solenoid.





15. Install purge solenoid to bracket.

16. Connect negative battery cable.

pro multis · About Operation CHARM