Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> 300 V6-3.5L VIN G >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> EGR Tube >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








3.5L




1. Clean mounting surface.

2. Install new rubber silicone seals on intake manifold end of EGR tube.
3. Lubricate the EGR mounting tube hole in the intake manifold with clean soapy water. Do not lubricate the EGR tube or seal.
4. Install tube into the intake manifold being careful that the silicone rubber seals are correctly installed and undamaged.






5. Install the tube bolts to EGR valve.
6. Tighten the EGR tube to EGR valve bolts to 15 Nm (135 in. lbs.) torque.






7. Connect the electrical connector to EGR valve and lock.
8. Verify that no wiring harnesses or hoses are contacting the EGR tube.
9. Install upper intake manifold.
10. Install the shock tower brace.
11. Install the wiper module.
12. Relocate the purge solenoid.






13. Install purge solenoid to bracket.
14. Connect negative battery cable.

pro multis · About Operation CHARM