Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> 300 V8-5.7L VIN H >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Motor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Installation






5.7L

REAR WHEEL DRIVE (RWD)





1. Position starter (2) into transmission but do not install bolts.

2. Connect solenoid wire to starter motor (snaps on).

3. Position battery cable to solenoid stud. Install and tighten battery cable eyelet nut. Refer to Torque Specifications. Do not allow starter motor to hang from wire harness.

4. Install and tighten three mounting bolts (1). Refer to Torque Specifications.

5. Lower vehicle.

6. Connect negative battery cable.

ALL WHEEL DRIVE (AWD)





7. Position starter (1) into transmission but do not install bolts.

8. Connect solenoid wire to starter motor (snaps on).

9. Position battery cable to solenoid stud. Install and tighten battery cable eyelet nut. Refer to Torque Specifications. Do not allow starter motor to hang from wire harness.

10. Install and tighten both mounting bolts (2). Refer to Torque Specifications.

11. Install steering gear assembly and mounting bolts. Install steering column coupling bolt (pinch bolt). Refer to Steering for torque specifications.

12. Install steering gear heat-shield.

13. Lower vehicle.

14. Connect negative battery cable.
pro multis · About Operation CHARM