Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Aspen 2WD V8-4.7L Flex Fuel >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Motor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION

3.7L / 4.7L With Manual Trans.





1. Connect solenoid wire to starter motor (snaps on).

2. Position battery cable (1) to solenoid stud. Install and tighten battery cable eyelet nut (2). Refer to Torque Specifications. Do not allow starter motor to hang from wire harness.

3. Position starter motor (5) to transmission.

4. Install and tighten lockwasher (6) nut (8) and bolt (9). Refer to Torque Specifications.

5. Lower vehicle.

6. Connect negative battery cable.

3.7L / 4.7L With Auto. Trans.





1. Connect solenoid wire to starter motor (snaps on).

2. Position battery cable (1) to solenoid stud. Install and tighten battery cable eyelet nut (2). Refer to Torque Specifications. Do not allow starter motor to hang from wire harness.

3. Position starter motor (4) to transmission.

4. If equipped with automatic transmission, slide cooler tube bracket into position.

5. Install and tighten both bolts (3). Refer to Torque Specifications.

6. Lower vehicle.

7. Connect negative battery cable.

5.7L V-8





1. Connect solenoid wire to starter motor (snaps on).

2. Position battery cable to solenoid stud. Install and tighten battery cable eyelet nut. Refer to Torque Specifications. Do not allow starter motor to hang from wire harness.

3. Position starter motor (1) to engine.

4. If equipped with automatic transmission, slide cooler tube bracket into position.

5. Install and tighten both mounting bolts (2). Refer to Torque Specifications.

6. Lower vehicle.

7. Connect negative battery cable.
pro multis · About Operation CHARM