Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Installation
INSTALLATION
NOTE: Refer to the fuse and relay map on the inside of the junction block (JB) cover for EBL relay location.
1. Position the EBL relay into the proper receptacle of the JB (1).
2. Align the EBL relay terminals with the terminal cavities in the JB receptacle and push down firmly on the relay until the terminals are fully seated.
3. Install the trim cover onto the driver side cowl (2).
4. Reconnect the negative battery cable.