Removal

REMOVAL




1. Remove the front seat back.

2. Lay the seat back (1) down on a suitable surface with the cover (2) down.

3. Unhook the cover (2) all the way around on the clip groove in the rear shell.




4. Remove seat back frame (3) from the foam rubber pad (2).




5. Remove the cover (2) from the Velcro(R) strip in area of seat back (1) hinge area.




6. Pull the cover (1) over the foam rubber pad (3) in the upper area.

7. Remove the longitudinal retainers by turning the upholstery clips (2) 90�.

8. Remove the cover (1) from the foam rubber pad (3).




9. Pull the upholstery wires (2) out of the fabric sleeves (3) in the cover (1).




10. Remove the upholstery clips (2) on the rear of the foam rubber pad (1).