Removal

2.0/2.4L




1. Remove the air cleaner lid, disconnect the inlet air sensor and makeup air hose.

2. Disconnect the negative battery cable.

3. Loosen the upper generator T-bolt lock nut.




4. Raise vehicle on hoist.

5. Remove the right front wheel.

6. Remove the accessory drive splash shield.




7. Remove the pencil strut.




8. Loosen the lower pivot bolt.




9. Loosen the accessory drive belt T-bolt.

10. Unplug field circuit from generator.




11. Remove the B+ terminal nut and wire.

12. Remove the generator belt.

13. Remove the axle retaining nut.

14. Remove the lower control arm from steering knuckle.

15. Remove axle shaft. Put a container under the transmission to catch the transmission fluid from the transmission.

16. Remove the generator lower mounting bolt and nut from the upper T-bolt.

17. Remove generator out the bottom.