Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Installation
INSTALLATION
NOTE: Cross bars must be installed onto the side rails before installing rails.
1. Place side rails in position on a clean flat surface. Starting at front end of side rails slide crossbars onto side rails .
2. Place crossbars into position on side rails and press the lower edge of the cross bar lever to lock it into position on each side.
3. Place luggage rack assembly into position on vehicle.
NOTE: To ensure proper sealing of the threads, new screws should be used.
4. Install new attaching screws into the RIV nuts and tighten screws to 6 Nm (55 in. lbs.) torque.
NOTE: To minimize wind noise, both crossbars should be repositioned to the rear of the vehicle.