Programming and Relearning

DRIVE MOTOR TEACH PROCEDURE

REPLACEMENT DRIVE MOTOR

1. Press and hold the sunroof switch open until the sunroof glass fully opens, automatically reverses direction, and stops at a position just forward of the full open position.

2. Release sunroof switch.

3. Within five seconds of releasing sunroof switch, press and hold the sunroof switch open again until the sunroof glass closes, goes into vent position, and then finally stops in the closed position.

4. Release sunroof switch. Sunroof will now operate normally.


ORIGINAL DRIVE MOTOR

1. Press and hold sunroof switch open until the sunroof glass opens and stops.

2. Release sunroof switch.

3. Press and hold sunroof switch open once again for at least 10 seconds. After 10 seconds of pressing the switch open, the sunroof glass will automatically move and stop at a new location.

4. Release sunroof switch.

5. Within five seconds of releasing the sunroof switch, press and hold the switch open again until the sunroof glass closes, goes into vent position, and then finally stops in the closed position.

6. Release sunroof switch. The sunroof will now operate normally.