Removal

REMOVAL




1. Release fuel pressure.

2. Remove Fuel Tank.

WARNING: The fuel reservoir of the fuel pump module does not empty out when the tank is drained. The fuel in the reservoir will spill out when the module is removed.

3. Disconnect fuel line from fuel pump module by depressing quick connect retainers with thumb and fore finger.

4. Slide fuel pump module electrical connector lock to unlock.

5. Disconnect the electrical connection from the fuel pump module, by pushing down on connector retainer and pulling connector off of module.




6. Mark fuel pump location.




7. Use special tool 9340 to remove module lock ring.




8. Remove fuel pump and O-ring seal from tank. Discard old seal.