Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Procedures
STANDARD PROCEDURE - PISTON RING FITTING 1.
Wipe cylinder bore clean. Insert ring and push down with
piston to ensure it is square in bore. The ring gap measurement must be made with the ring positioning at least
12 mm (0.50 in.) from bottom of cylinder bore. Check gap with feeler gauge (1).
2.
Check
piston ring to groove clearance (1). For clearance specifications, Refer to ENGINE SPECIFICATIONS.
