Vehicle Theft Security

B210E-BATTERY VOLTAGE HIGH (WIN)





For a complete wiring diagram consult Diagrams/Electrical.


- When Monitored:
With the ignition switch on.

- Set Condition:
The Wireless Ignition Node (WIN) has detected the Fused (B+) input voltage above a calibrated value.








Diagnostic Test


1. DETERMINING IF DTC IS CURRENT
CAUTION: Diagnose and repair all Powertrain DTCs before continuing.

Turn the ignition on.
With the scan tool, record and erase the WIN DTCs.
Perform 5 ignition cycles, leaving the ignition switch on for a minimum of 90 seconds per cycle.
Using the scan tool, read the WIN DTCs.
Does the DTC reset?

Yes


- Replace and program the Wireless Ignition Node.
- Perform the WIN VERIFICATION TEST. Vehicle Theft Security Verification Tests


No


- Perform the WIN VERIFICATION TEST. Vehicle Theft Security Verification Tests