Adaptive Cruise Control (ACC) Verification Test

ADAPTIVE CRUISE CONTROL VERIFICATION TEST


Diagnostic Test


1. ADAPTIVE CRUISE CONTROL VERIFICATION TEST
Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
With the scan tool, select Clear Stored DTCs.
Make sure that all accessories are turned off and that the battery is fully charged.
If the ACC Module was replaced or moved in any way, the ACC Module must be aligned. Perform the ADAPTIVE CRUISE CONTROL ALIGNMENT. Procedures
Test drive the vehicle and verify proper operation.
With the scan tool, select View DTCs in the ACC Control Module.
Are there any DTCs present in the ACC Module?

Yes


- Diagnose and repair the DTC(s).


No


- Repair is complete.