Installation

INSTALLATION





CAUTION: Roll down the left and right front door glass and open the liftgate glass before installing quarter glass to avoid pressurizing the passenger compartment if a door is slammed before urethane is cured. Water leaks can result.

NOTE: The quarter glass fence should be cleaned of all old butyl sealer. Do not grind sealer off the fence, the paint finish will be adversely affected.

1. Apply 6 mm (0.25 in.) wide butyl tape around perimeter of the (2) quarter glass approximately 5 mm (0.2 in.) from the edge of the glass. Ensure the butyl tape is wrapped around the mounting studs.
2. Place the quarter glass into the window opening (3) and insert mounting studs (1 and 4) through the holes in the window fence.
3. Install the nuts that secure the quarter glass to the window fence. Tighten the nuts to 4.5 Nm (40 in. lbs.).
4. Install the headliner.
5. Install quarter panel trim.