Front

FRONT





NOTE: Install new copper washers on the banjo bolt when installing

1. Install the disc brake caliper (2) to the brake caliper adapter (3).




CAUTION: Verify brake hose (3) is not twisted or kinked before tightening fitting bolt.

2. Install the banjo bolt (1) with new copper washers (4) to the caliper (2). Tighten to 18 Nm (155 in. lbs.)
3. Install the caliper slide pin bolts. Tighten to 32 Nm (24 ft. lbs.)
4. Bleed the base brake system, Brake Bleeding.
5. Install the tire and wheel assembly, Removal and Replacement.
6. Lower the vehicle.