Installation

INSTALLATION





CAUTION: To prevent severe damage to the Crankshaft, Damper or Special Tool 8512, thoroughly clean the damper bore and the crankshaft nose before installing Damper.

1. Using Special Tool 8348 and 8512 (2,3), install crankshaft front seal.
2. Install vibration damper Vibration Damper - Installation.
3. Install radiator cooling fan and shroud Radiator Fan - Installation.
4. Install upper radiator hose.
5. Install A/C compressor and tighten fasteners to 54 Nm (40 ft. lbs.).
6. Install accessory drive belt. Accessory Drive Belt - Installation.
7. Refill cooling system Service and Repair.
8. Connect negative cable to battery.