Rear

REAR





The rear washer nozzle (3) is a fluidic-type unit constructed of molded plastic. The nozzle is secured by a snap fit in a dedicated mounting hole in the liftgate outer panel above the liftgate glass with the orifice (5) aimed downward. A rubber gasket (2) seals the nozzle to the outside of the liftgate panel. The back of the nozzle includes an integral alignment feature (4), an engagement tab (1), a latch feature (6) and the washer plumbing nipple (7) which are all concealed between the liftgate inner and outer panels when the nozzle is installed.

The rear washer nozzle latch feature is a one time component, and will be damaged if the nozzle is removed from its mounting hole for service. The rear washer nozzle unit cannot be adjusted or repaired. If ineffective or damaged, the entire nozzle unit must be replaced.