Coolant Recovery Container - Removal

2.0/2.4L ENGINE

Non - Turbo





1. Disconnect overflow hose (2) from coolant outlet connector.
2. Remove vent hose clip from stud on dash panel.
3. Disconnect the MAP sensor connector.




4. Remove fasteners securing power steering fluid reservoir bracket to engine. Reposition reservoir.
5. Remove coolant recovery container (1) attaching fasteners.
6. Remove coolant recovery container.

Turbo





1. Disconnect overflow hose (1) from coolant outlet connector.
2. Raise vehicle on hoist.
3. Remove lower screw securing coolant recovery container to dash panel.
4. Lower vehicle.
5. Remove throttle cable shield from throttle body.
6. Disconnect throttle and speed control cables from throttle body. Reposition cables.




7. Remove nut securing coolant recovery container (3) to dash panel.
8. Remove coolant recovery container.