Throttle Body - Removal

2.4L TURBO





1. Disconnect the negative battery cable.
2. Unlock and disconnect the electrical connector for the inlet air temperature sensor.
3. Unlock and disconnect the electrical connectors from the idle air control motor and throttle position sensor.
4. Remove the throttle control shield.




5. Remove the throttle cable from the throttle body cam.




6. If equipped with speed control, remove speed control cable from the throttle cam by sliding clasp out hole used for throttle cable.
7. Remove the 2 screws for the throttle cable bracket.
8. Remove bracket.




9. Disconnect the throttle body inlet hose and remove from throttle body.
10. Disconnect the purge hose from the throttle body.
11. Remove the 3 bolts from the throttle body.




12. Remove the throttle body.




13. Clean and replace gasket.