PDM-3A

PDM-3A-LIN WINDOW MOTOR INTERNAL FAILURE





For a complete wiring diagram Consult Diagrams/Electrical

- When Monitored:
During a window operation command.

- Set Condition:
RAM check fails or EEPROM content is wrong for over one second.





Diagnostic Test

1. DTC PRESENT
Turn the ignition on.
With the scan tool, erase DTCs.
Cycle the ignition switch from Off to Run.
Operate the passenger window switch in all positions several times.
With the scan tool, read DTCs.
Does the scan tool display 3A-LIN WINDOW MOTOR INTERNAL FAILURE?

Yes

- Replace the Passenger Window Motor (regulator).
- PERFORM BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- The condition that caused this code to set is not present at this time. Operate the motor several times more to ensure it does not fail. If the motor fails again, replace the Passenger Window Motor (regulator).
- PERFORM BODY VERIFICATION TEST - VER 1. Body Verification Test