Radiator - Installation

INSTALLATION





1. Position radiator cooling fans on radiator.
2. Position combination A/C condenser/cooler on radiator.
3. Slide radiator into position and seat the radiator assembly lower rubber isolators in the mount holes.
4. Install A/C lines to condenser.
5. Install mounting block to radiator. Tighten mounting screws to 5 Nm (45 in. lbs.).




6. Connect cooling fan electrical connector.
7. Install lower radiator hose at radiator.
8. Install upper radiator support.
9. Install front bottom splash shield
10. Install under engine splash shield.
11. Fill cooling system Service and Repair.
12. Charge A/C systemRefrigerant System Charge.
13. Install air filter housing Air Cleaner Housing - Installation.
14. Connect negative battery cable.
15. Install engine cover.