Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Sebring Sedan V6-2.7L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Air Injection >> Air Injection Pump >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Installation







INSTALLATION





1. Install air pump (3) to bracket (4).
2. Install air pump mounting nuts (5) to bracket (4). Tighten the nuts to 8 Nm (71 in. lbs.).
3. Connect electrical harness connector (1) to the air pump electrical connector (2).




4. Install heat shield (3) and bolt (1) to air pump bracket (2). Tighten the bolt to 8 Nm (71 in. lbs.).




5. Install relay, heat shield (2) and bolt (1) to air pump bracket (3). Tighten the bolt to 8 Nm (71 in. lbs.).




NOTE: The quick connect fitting on the air inlet tube is slotted to fit the air pump housing fitting. Line the slot up when making the connection.

6. Install air inlet tube (3) to air pump housing connection (2). A click noise will indicate a good connection.
7. Connect the negative battery cable, tighten the nut to 5 Nm (45 in. lbs.).
pro multis · About Operation CHARM