Steel Wheel

TIRE AND WHEEL ASSEMBLY - STEEL WHEEL

1. Raise and support the vehicle so that tire and wheel assembly clears ground level. Maintenance




CAUTION: When removing the bolt-on wheel cover, do not attempt to pry the wheel cover off the wheel. It is held on by the wheel mounting nuts.

2. Remove the five wheel mounting (lug) nuts (3) from the wheel studs. While removing the nuts, hold the wheel cover (2) in place so it doesn't fall off when the last nut is removed.
3. Remove the wheel cover (2) using care not to let the tire and wheel assembly (1) fall off the vehicle.
4. Remove the tire and wheel assembly (1) from the hub.