Second Row Bench Seat

SECOND ROW BENCH SEAT

WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts, buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the DaimlerChrysler Mopar(R) Parts Catalog.





1. Position the double seat belt buckle lower anchor (2) to the rear edge of the cushion frame (4) on the underside of the bench seat.
2. Install and tighten the screw (1) that secures the double buckle unit to the seat. Tighten the screw to 39 Nm (29 ft. lbs.).
3. Reinstall the second row bench seat into the vehicle.