Step 1 - 10

DISASSEMBLY

NOTE: Keep the Top Sound Dampener Cover if replacing the unit






NOTE: If transaxle is being overhauled (clutch and/or seal replacement) or replaced, it is necessary to perform the PCM/TCM Quick Learn Procedure Testing and Inspection.

NOTE: This procedure does not include final drive (differential) disassembly.

1. Remove input and output speed sensors.
2. Remove the solenoid/pressure switch assembly-to-case bolts.
3. Remove solenoid/pressure switch assembly and gasket (2).




4. Remove oil pan-to-case bolts (1).




5. Remove oil pan (1).




6. Remove oil filter (1).




7. Turn manual valve fully clock-wise to get park rod into position for removal.
8. Remove valve body-to-case bolts (1).




9. Using a screwdriver (2), push park rod rollers away from guide bracket (3).




CAUTION: Do not handle the valve body assembly from the manual valve. Damage can result.

10. Remove valve body assembly (1).