Installation

INSTALLATION





NOTE: Ensure rubber grommet in the bulkhead is fully seated to prevent water leaking into the passenger compartment.

1. Install the shift cable (2) through the bulkhead (1) from the passenger compartment.
2. Seat rubber grommet in the bulkhead.




3. Connect gearshift cable to the bracket.
4. Connect gearshift cable (1) to transaxle manual valve lever (2).




NOTE: Ensure the lock tab on the shift cable (2) is seated after the cable in installed to the shifter housing.

5. Install the cable to the shifter (1, 2).
6. Install the knee blocker (2)Removal.