Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Town & Country V6-3.3L Flex Fuel >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shifter A/T >> Service and Repair >> Shift Mechanism >> Installation

Installation







INSTALLATION





1. Install the upper shifter mounting bolts (1) and tighten to 20 Nm (15 ft. lbs.).




2. Install the lower shifter mounting bolts (1) and tighten to 20 Nm (15 ft. lbs.).




NOTE: Ensure the lock tab is in the lock position after the cable is installed onto the shifter housing (2).

3. Install the shift cable (1, 2) at the shifter.




4. Install the WIN (2) and install the mounting screws (1).




5. Connect the electrical connectors (3, 4) at the WIN (1) and the shifter (2).




6. Install the I/P cover (3).




7. Install the knee blocker (2)Installation.




8. Install the shift knobInstallation.
9. Install the ignition switch bezel (1) to I/P cover (2).




10. Install center stack cover (1) back into position.




11. Install the center stack top cover (1) back.
12. Install the cluster bezelInstrument Panel Cluster Bezel - Installation.




13. Install the screws (1) at the center stack cover (2).




14. Install the defroster cover (1).
15. Connect the battery cable.
pro multis · About Operation CHARM