Installation

INSTALLATION






MOTOR-FRONT DOOR WINDOW






1. Install the window motor.
2. Install the mounting fasteners.
3. Connect the electrical connector.
4. Install the door trim panel.Front Door Trim Panel - Installation.
5. Connect the battery negative cable.


MOTOR-SLIDING DOOR WINDOW






1. Install the window motor.
2. Install the mounting fasteners.
3. Connect the electrical connector.
4. Install the sliding door trim panel.Installation.
5. Connect the battery negative cable.


MOTOR-VENT WINDOW






1. Obtain new vent window motor (3).
2. Install bolts (2) holding power vent motor to D-pillar.
3. Snap the actuator link socket (4) onto the quarter window ball socket (4). Using a soft rubber mallet, push the circular link tab (5) flush with link surface.Installation.
4. Reconnect wire connector (1) to power vent motor.
5. Reconnect the battery negative cable.
6. Cycle quarter window open/close to verify function.
7. Install D-pillar trim panel.Installation.
8. Connect the battery negative cable.