Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2009 >> Sebring Sedan L4-2.4L >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair >> Generator - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Generator - Installation






2.0L/2.4L





1. Move the A/C compressor to the side to install the generator.





2. Rotate the generator and set it in place.





3. Make sure the battery terminal (1) is in front of the A/C line (2).





4. Loosely install the lower mounting bolt.





5. Loosely install the upper mounting bolt.
6. Tighten the bolts to 54 Nm (40 ft. lbs.).





7. Install the B+ terminal nut and wire and tighten to 10 Nm (88.5 in. lbs.).





8. Plug in the field circuit to the generator.





9. Install idler pulley and tighten the bolt.
10. Install the serpentine belt Serpentine Accessory Drive Belt - Installation
11. Install the splash shield.





12. Install the lower air dam.
13. Lower the vehicle.
14. Connect the negative battery cable.

pro multis · About Operation CHARM