Reset Procedure

Brake/Transaxie Interlock System Override


NOTE: If a malfunction occurs, the transaxle will not shift out of PARK. Battery power is required to release the Brake/Transaxle Interlock system However, an override system allows you to shift out of PARK in case of loss of power To activate the override system:
^ Firmly apply the parking brake
^ Insert the ignition key into the ignition key lock cylinder and rotate it to the ON position.
^ Remove the cup holder liner.






^ Insert a key, screwdriver, or finger into the hole at the front of the cup holder and push and hold the manual override release lever forward.
^ While holding the release lever forward, move the shift lever from PARK to NEUTRAL.
^ Release the manual override.

NOTE: If this occurs, even if the override is successful, it is recommended that you visit a dealer at your earliest possible convenience. Your dealer has diagnostic equipment to determine if the problem could recur.