Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2010 >> Sebring Sedan V6-2.7L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair >> Ignition Switch - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Switch - Installation






INSTALLATION










1. Install shift interlock cable to ignition switch, .





2. Push ignition switch up into connect electrical connectors.





3. Install location t on ignition switch into slot on instrument panel.
4. Pull ignition switch into place.





5. Make sure that location pins are in place.





6. Install two front mounting screws and tighten.





7. Rear mounting screw and washer.





8. Install rear mounting screw and washer and tighten.





9. Connect two electrical connectors to the back of the instrument cluster





10. Relocate instrument cluster and install, Instrument Cluster - Installation.





11. Install instrument cluster bezel, Instrument Cluster Bezel - Installation.





12. Install radio bezel, Instrument Panel Bezel - Installation.





13. Connect negative battery cable.
14. Adjust shift interlock if necessary, .

pro multis · About Operation CHARM