Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2010 >> Sebring Sedan V6-2.7L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Keyless Starting System >> Keyless Start Antenna >> Service and Repair >> Remote Start Antenna - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Remote Start Antenna - Removal






REMOVAL






WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may result in serious or fatal injury.

The remote start antenna is located driver's side front of dash.

1. Disconnect and isolate the battery negative cable.
2. Remove radio. Refer to Radio - Removal.
3. Remove instrument cluster. Refer to Instrument Cluster - Removal.
4. Remove the instrument panel top pad. Refer to Instrument Panel Pad - Removal.

NOTE: During removal of the remote start antenna note the routing location of the coaxial cable.

5. Disconnect remote start antenna coaxial cable connector (1) from skreem module (3).
6. Remove the mounting clip (2).





7. Remove the mounting clip at the steering column reinforcement bracket.
8. Remove screws (1) and remove remote start antenna (2) from instrument panel assembly.

pro multis · About Operation CHARM