B210C-00

B210C-00-BATTERY VOLTAGE INPUT



- When Monitored:
With the ignition on.

Vehicle speed greater than 6 mph (9.6 km/h).

- Set Condition:
The Blind Spot Module detects an internal failure.





CHECK FOR ACTIVE DIAGNOSTIC TROUBLE CODE (DTC)
1. Turn the ignition on.
2. Using the scan tool, read BSM DTCs.

Does the scan tool display this DTC as active?

Yes

- Replace the Blind Spot Module (BSM).
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- The condition that caused this code to set is not present at this time. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched and partially broken wires. Also inspect the related connectors for broken, bent, pushed out, spread, corroded or contaminated terminals.
- Perform the BODY VERIFICATION TEST. Body Verification Test.