Second Row, Swivel - Upper Swivel

INSTALLATION

NOTE: Right seat shown in illustrations. Left seat similar.






NOTE: Outboard side shield shown. Inboard side shield similar.

1. Position each seat cushion side shield (4) to the seat (2) and install the two retaining screws (3 and 5). Tighten the screws securely.
2. Align the recliner handle (1) to the lever that protrudes through the outboard seat cushion side shield and slide the handle rearward onto the lever. Make sure the handle is fully engaged to the lever.





3. Position the seat cushion front shield (1) to the front of the seat (2) and engage the retaining tabs that secure the shield to the seat.
4. Install the seat back hinge covers Seat Back Hinge Cover - Installation.