Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2012 >> 200 L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Roof and Associated Components >> Convertible Top >> Convertible Top Position Sensor / Switch >> Service and Repair >> Power Top Switch - Installation >> Stack Cylinder Position
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Stack Cylinder Position






INSTALLATION





1. Position the folding top stack cylinder position switch (2) onto the folding top stack cylinder (3).
2. Secure the position switch to the folding top stack cylinder. Push the switch retainer (4) over the switch (2). Push the position switch retainer locking tab (1) towards the retainer (4) until the two are fully engaged.





3. Connect the position switch (4) wire harness routing clips to the left inner quarter panel.
4. Connect the folding top stack cylinder position switch electrical connector.
5. Position the cylinder onto the vehicle main pivot bracket assembly (3) and install the retaining pin and clip (2).
6. Install the left and right trunk trim panels.
7. Install the rear trunk trim panel.
8. Close the rear decklid.
9. Connect the battery negative cable.

pro multis · About Operation CHARM