Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2012 >> 200 L4-2.4L >> Repair and Diagnosis >> Instrument Panel, Gauges and Warning Indicators >> Outside Temperature Display >> Outside Temperature Display Sensor >> Service and Repair >> Ambient Temperature Sensor - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Ambient Temperature Sensor - Installation






INSTALLATION





1. Reach up between the lower edge of the front fascia and the front of the a/c condenser near the right end of the lower air intake opening to position the ambient temperature sensor (3) just below the front bumper (1).
2. Align the sensor with the wire harness connector (2) for the sensor.
3. Push the sensor straight into the connector until the connector latch engages with an audible click, then engage the Connector Position Assurance (CPA) lock on the connector.
4. Reinstall the front fascia lower close out panel onto the vehicle. Front Lower Fascia Closeout - Installation.
5. Lower the vehicle.
6. Reconnect the battery negative cable.

pro multis · About Operation CHARM