Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2012 >> 200 L4-2.4L >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair >> Stop Lamp Switch - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Stop Lamp Switch - Removal






REMOVAL





1. Disconnect and isolate the battery negative cable.
2. If equipped, remove the silencer pad from below the steering column. Lower Silencer Panel - Removal.
3. Locate the brake lamp switch (2) on the brake pedal support bracket (4) under the instrument panel.
4. Depress and hold the brake pedal in the depressed position.
5. Rotate the brake lamp switch housing (2) counterclockwise about 30 degrees to align the tabs on the switch locking collar with the keyed hole in the brake pedal support bracket.
6. Pull the switch straight rearward from the keyed hole to remove it from the bracket.
7. Release the brake pedal.
8. Disconnect the wire harness connector (1) from the switch.

pro multis · About Operation CHARM