Active Damping Control Module (ADCM)

U0429-00-IMPLAUSIBLE DATA RECEIVED FROM SCM

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
Continuously with the ignition on, one valid CAN message received at least once, and no U0002-88-CAN C Bus Off Performance DTC present.

- Set Condition:
When the Active Damping Control Module (ADCM) detects an incorrect CAN message from the Steering Control Module (SCM).





STEERING ANGLE SENSOR (SAS) DTCS PRESENT
1. Ignition on, engine not running.
2. With the scan tool, read the DTCs in the SAS.

Are there any DTCs present?

Yes

- Perform the appropriate diagnostic procedure. Testing and Inspection.

No

- Replace the Active Damping Control Module (ADCM). Active Damping Control Module - Removal.
- Perform the ADCM VERIFICATION TEST. Active Damping Control Module (ADCM) Verification Test.