Crankshaft Main Bearing: Specifications

CRANKSHAFT MAIN BEARING CAP






Tighten the main bearing cap bolts 13 Nm (10 ft. lbs.).
Again, Tighten the main bearing cap bolts 28 Nm (21 ft. lbs.).
Rotate the main bearing cap bolts an additional 90°.






The main bearing cap crossbolts are torqued after the final torque of the main cap bolts.

Tighten the crossbolts 31 Nm (23 ft. lbs.).

Again, using the sequence shown, repeat the crossbolt tightening procedure.






CRANKSHAFT MAIN BEARING CLEARANCE

Bearing Clearance 0.023 - 0.051 mm (0.0009 - 0.002 in)

MAIN BEARING SELECTION