Cylinder Head Assembly: Specifications

CYLINDER HEAD ASSEMBLY






Tighten the retaining bolts.
Tighten bolts 1-10 34 Nm (25 ft. lbs.).
Tighten bolts 11-15 20 Nm (15 ft. lbs.).
Tighten bolts 1-10 54 Nm (40 ft. lbs.).
Verify bolts 11-15 20 Nm (15 ft. lbs.).
Tighten bolts 1-10 61 Nm (45 ft. lbs.).
Rotate bolts 1-10 an additional 90 degrees.
Tighten bolts 11-15 34 Nm (25 ft. lbs.).











SURFACE VARIATION

If tolerances exceed 0.0508 mm (0.002 in.) replace the cylinder head.






CAMSHAFT BEARING CAP

Install the camshaft thrust plate,
Tighten retaining bolts 12 Nm (106 in. lbs.).

INTAKE MANIFOLD

Intake Manifold Specifications

EXHAUST MANIFOLD

Exhaust Manifold Specifications

CAMSHAFT GEAR/SPROCKET

Camshaft Gear/Sprocket Specifications