Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2012 >> Town & Country V6-3.6L >> Repair and Diagnosis >> Lighting and Horns >> Relays and Modules - Lighting and Horns >> Headlamp Alignment Control Module >> Service and Repair >> Headlamp Leveling Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Headlamp Leveling Module - Installation





INSTALLATION





1. Position the Automatic Headlamp Leveling Module (AHLM) (also known as the High Intensity Discharge Transducer/HIDT) (1) and mounting strap over the studs on the top of the left inner rear wheel housing (3) as a unit.
2. Install and tighten the two nuts (2) that secure the mounting strap of the AHLM to the two studs on the top of the left inner rear wheel housing. Tighten the nuts to 11 Nm (8 ft. lbs.).
3. Reconnect the body wire harness connector to the connector receptacle of the AHLM.
4. Reinstall the trim onto the left quarter inner panel. Quarter Trim Panel - Installation.
5. Reconnect the battery negative cable.

pro multis · About Operation CHARM