Tail Lamp Bulb - Removal - Export

BULBS






BULBS

There are a total of four possible bulbs in the tail lamp unit:

- Tail and stop lamp (1)
- Turn signal (2)
- Back up lamp (3)
- Rear fog lamp (4) (Export only)

1. Remove the tail lamp unit Service and Repair.

NOTE: It is not necessary to completely remove the tail lamp unit. Once loosened from quarter panel, there should be enough room to service any of the bulbs.

2. Disconnect the electrical connector for the appropriate bulb.
3. Remove bulb socket from tail lamp unit by twisting 1/4 turn counterclockwise.
4. Pull socket straight out of tail lamp unit.
5. Pull bulb from socket.